Round Robin Bracket Maker
A round robin is not a bracket: every team plays every other team once. Generate the schedule, see each round's bye, click results in, and read the standings.
The bracket maker
Team names one per line — line 1 is seed 1
One team per line. Line 1 is seed 1 — reordering the lines reorders the seeds.
Click a team in the schedule to advance it. The winner appears here.
| Round | Team | Team | Score | |
|---|---|---|---|---|
| R1 | v | |||
| R1 | v | |||
| R1 | v | |||
| R1 | v | |||
| R2 | v | |||
| R2 | v | |||
| R2 | v | |||
| R2 | v | |||
| R3 | v | |||
| R3 | v | |||
| R3 | v | |||
| R3 | v | |||
| R4 | v | |||
| R4 | v | |||
| R4 | v | |||
| R4 | v | |||
| R5 | v | |||
| R5 | v | |||
| R5 | v | |||
| R5 | v | |||
| R6 | v | |||
| R6 | v | |||
| R6 | v | |||
| R6 | v | |||
| R7 | v | |||
| R7 | v | |||
| R7 | v | |||
| R7 | v |
| # | Team | W | L | Diff |
|---|---|---|---|---|
| 1 | Team 1 | 0 | 0 | 0 |
| 2 | Team 2 | 0 | 0 | 0 |
| 3 | Team 3 | 0 | 0 | 0 |
| 4 | Team 4 | 0 | 0 | 0 |
| 5 | Team 5 | 0 | 0 | 0 |
| 6 | Team 6 | 0 | 0 | 0 |
| 7 | Team 7 | 0 | 0 | 0 |
| 8 | Team 8 | 0 | 0 | 0 |
8 teams, 3 rounds, 7 games, no byes
The circle method, and why the schedule is not arbitrary
A round robin for N teams has N(N − 1) ÷ 2 games, because every pair meets exactly once. For eight teams that is 28 games over 7 rounds of four; for nine teams it is 36 games over 9 rounds of four, with one team sitting out each round.
The schedule is generated with the circle method: one team is fixed and the rest rotate one place each round. Every team therefore meets every other team exactly once, and the bye — when the count is odd — moves round the field instead of landing on the same team twice. That last property is the one hand-written schedules get wrong: with nine teams it is easy to give one team two byes and another none.
The tests behind this page check the property directly: for every team count from 3 to 20, every pair appears exactly once and the number of games is N(N − 1) ÷ 2.
What the table gives you
- One row per game, grouped by round, with the round number in the first column
- Click a team to record the winner — or type a score and the winner follows the score
- A standings table with wins, losses and point difference
- Head-to-head as the first tiebreak, then point difference
| Fact | Value | Why |
|---|---|---|
| Teams | 8 | the number you chose |
| Bracket slots | 8 | next power of two above 8 |
| Rounds | 3 | log2(8) |
| Byes | 0 | none needed |
| Games, single elimination | 7 | teams − 1 |
| Games per round | 4 · 2 · 1 | rounds 1–3 |
| Games, double elimination | 14 | 2 × teams − 2, champion unbeaten |
| Games with a bracket reset | 15 | 2 × teams − 1 |
| Double elimination split | 7 winners + 6 losers + 1 grand final | 4 losers rounds |
| Round robin rounds | 7 | teams − 1 |
| Round robin games | 28 | teams × (teams − 1) ÷ 2 |
Odd team counts and the bye
An odd number of teams cannot all play in the same round, so each round one team sits out. Nine teams play four games per round for nine rounds, and each team sits out exactly once. The schedule above handles that automatically; the bye is the team that does not appear in a round.
The alternative is to add a “bye team” placeholder and treat its matches as wins, which is what some leagues do. It is worse: a phantom team inflates everybody’s record unequally depending on who played it twice. Sitting a real team out each round is cleaner and is what this generator does.
With an even count there is no bye at all, which is why organisers often add or drop one team to make the number even. Eight teams is 28 games, seven is 21 — one fewer team, six fewer games.
Standings, tiebreaks, and why point difference is not enough
The standings count wins and losses, then sort by wins, then by point difference, then by head-to-head. Head-to-head is listed as the first tiebreak in the caption because that is what most league rules use, but it only breaks a tie between two teams — with three teams level on wins, head-to-head can be circular, which is why point difference is there as well.
Point difference comes from the scores you type, so it stays at zero until you enter them. If you only click winners, the standings are still correct on wins and losses and the tiebreak falls through to the order the teams were entered.
For three or more teams level on wins, the honest solution is a documented rule: either a mini-table between the tied teams, or total points scored, or a coin toss. Write whichever you use on the printed sheet, because the table alone cannot resolve a three-way tie without one.
Round robin or bracket: choosing
A bracket answers “who won today” in the fewest games; a round robin answers “who is best” and takes N(N − 1) ÷ 2 games to do it. Eight teams: 7 games in a bracket, 28 in a round robin. That is the whole trade.
Round robins are the right format for a league that meets repeatedly, for a small field where everybody travelled, and for events where a single upset should not decide the day. Brackets are right when the event has to end on time, and double elimination is the compromise when one loss is too harsh but a full round robin is too long.
Both formats are one click apart in this tool, and switching keeps the names you typed. The bracket pages cover single and double elimination; this page covers the schedule and the table.
Frequently asked questions
How many games is a round robin with 8 teams?
Twenty-eight: 8 × 7 ÷ 2. It runs over 7 rounds of 4 games, and with an even number of teams nobody has a bye. Nine teams would be 36 games over 9 rounds of 4, with one team sitting out each round.
How is the schedule generated so nobody plays twice?
With the circle method: one team stays fixed and the others rotate one position per round. That construction guarantees every pair meets exactly once and, for odd counts, that the bye moves around the field instead of landing on the same team.
What tiebreak does the standings table use?
Wins first, then point difference, with head-to-head noted as the first tiebreak for a two-team tie. A three-way tie cannot be resolved by head-to-head alone, so write your league’s rule — mini-table, total points or coin toss — on the printed sheet.
Can I use this for more than 20 teams?
Not here: the round robin is capped at 20 teams, because a 20-team round robin is already 190 games and a 30-team one is 435, which no printed sheet survives. For larger fields, split into groups and run a round robin per group with a knockout for the group winners.
Every number on this page is computed by the bracket engine on the page itself, not typed into the copy. No team name, league name or result is uploaded: the bracket lives in your browser and in the URL fragment you choose to share.